← All articles

Sonoff Orb-ZBW1 review: office lights with Home Assistant

I installed the Sonoff Orb-ZBW1 to control my office lights with Home Assistant, keep the socket permanently powered and add another router to my Zigbee mesh.

Maxime2 min read
White Sonoff Orb-ZBW1 switch and its orange box, front view.

In my office, I had a wall switch that only controlled a power socket. The lights were already smart, but I couldn’t control them with that switch. A slightly odd setup, but that’s how it was.

So I bought a Sonoff Orb-ZBW1, a Zigbee wall switch that requires neutral, to control the office lights through Home Assistant while keeping the socket permanently powered.

Why choose a complete switch over a ZB Mini?

I previously wrote about the Sonoff ZB Mini for upgrading an existing switch. I like the idea, but the module has to fit behind the switch alongside the wires and connections. In my case, fitting everything into the back box was difficult.

That’s why I prefer the Orb-ZBW1 here: the control and module are integrated into one assembly. It saves me having to fit an extra module behind the existing switch.

Setting up the switch in Home Assistant with ZHA

The first thing that struck me was the control itself: it looks like a wall switch, but it’s a push button. It feels pleasant to press, although I find it slightly counterintuitive: looking at it, I expect a rocker switch.

Installation turned out to be very easy. Once installed, Zigbee Home Automation (ZHA) in Home Assistant detected it immediately. I could use the button straight away to alternate between two scenes: all the office lights on, or all of them off.

White Sonoff Orb-ZBW1 switch installed on the office wall beside the wooden door frame.

Detached mode: separating the button from the relay

“Detach Relay” mode separates the button from the electrical relay: pressing it no longer directly changes the contact’s state. This doesn’t mean the relay is permanently locked on, though.

ZHA device settings in Home Assistant for the office Sonoff switch, with Detach relay enabled.

In my setup, I also changed the wiring behind the switch so that the socket stays powered regardless of the relay’s state. It’s the wiring that keeps the socket powered. The Sonoff serves as a button for my lighting scenes.

Orb-ZBW1 vs ZBW1L: neutral and Zigbee routing

I also wanted to strengthen my Zigbee network. The Orb-ZBW1 requires neutral and can act as a Zigbee router, forwarding communications from other devices and contributing to the mesh. A neutral connection alone doesn’t guarantee this capability: it needs checking for each model.

The Orb-ZBW1L (ZBMINIL2-E) works without neutral. It is a Zigbee end device and does not relay communications from other devices. I chose the Orb-ZBW1 (ZBMINIR2-E), which requires neutral and has router functionality.

Sonoff documents these differences in its product specifications: Orb-ZBW1 and Orb-ZBW1L.

Overall, installation and setup in Home Assistant were very easy. The button controls the lights as intended, and the modified wiring keeps the socket powered. There’s just one habit to adjust: press, don’t rock.

I’m also considering replacing other switches around the house, particularly to control the outdoor lights.

Maxime

Maxime